WebIndex < Tasca < GSI Wiki

You are here: GSI Wiki>Tasca Web>WebIndex (2001-11-24, PeterThoeny)Edit Attach

Results from Tasca web retrieved at 17:49 (Local)

Main.TillKoch 16 Dec 2009 Changes Alot of Inputs and Outputs have been removed. Some Signals are no move handled by the controller but are realized in hardware. ...

NEW - 2009-12-16 - 15:42 by TillKoch

ArfaFPGAVI

This VI is programmed in LV 8.6.1 and is designed to run on a PXI 7831R FPGA device. FPGA VI /ARFAFPGAVImarked.JPG 1a read local inputs The VI reads the curren...

r3 - 2009-11-09 - 14:49 by TillKoch

AutomaticRapidFillingAutomatus

ARFA A utomated R apid F illing A utomatus General The ARFA is part of the experiment structure of ARCA .(Automated Rapid Chemistry Automatus) It is a machin...

r15 - 2009-12-16 - 15:31 by TillKoch

BCControlChopper

Beam Control Program How to Use the Chopper The upper part of the program window gives an overview of the beam line, showing the status of the chopper, Faraday ...

NEW - 2011-06-09 - 17:24 by JonPetterOmtvedt

BCMeasureIntensity

How to Measure Beam Intensity Beam Control Program, v. 1.3.0 build 8 Assuming program is running in normal mode (all settings as they should be during experiment ...

NEW - 2011-06-09 - 17:00 by JonPetterOmtvedt

BCSafetyLimits

Beam Control Program How to Set Safety and Warning Limits Beam Current Safety and Warning Limits (NODAL) In the current implementation of the Beam Conrol Progr...

r2 - 2011-10-05 - 09:08 by JonPetterOmtvedt

BCStartUp

Beam Control Program How to Start it Up When the PC reboots it will automatically load the right programs by the GSI distributed loading program. All you need t...

NEW - 2011-06-09 - 17:10 by JonPetterOmtvedt

BeamControlAug2011

Changes made to Beam Control Program in August 2011 (by JPO) Minor changes was made to the Beam Control program prior to the E120 experiments starting second half...

r2 - 2011-08-11 - 22:23 by JonPetterOmtvedt

BeamControlImages

Beam Control Application The Beam Control application is used to control some beamline elements, e.g. Faraday cups and chopper, and to monitor some beam parameter...

NEW - 2009-12-17 - 08:35 by HolgerBrand

BeamControlJune2011

Description of the new Beam Control Program (version 1.3.0 build 5) Changes made: * New screen layout. * Reduced log file size (now two options: Write each...

NEW - 2011-06-05 - 18:45 by JonPetterOmtvedt

BeamControlRequirements

Beam Control Requirements This page is used to collect the requirements for the new Beam Control application based on LabVIEW 2009. New: How to make a much better...

r6 - 2012-06-20 - 07:58 by JonPetterOmtvedt

BeamMonitorImages

Beam Monitor Application This host VI starts, stops and monitors the FPGA based beam current monitor which generated an interlock signal in case the current limit...

NEW - 2009-11-04 - 08:17 by HolgerBrand

ComputerLayout

General Layout of the TASCA Control Computers May/June 2011: New layout with three main 24 inch screens at the top row (from left to right): Beam Control ...

r2 - 2011-10-05 - 08:43 by JonPetterOmtvedt

LabView

As per October 2011 we use LabView 2009 for the TASCA control programs. Main.JonPetterOmtvedt 14 Oct 2011

NEW - 2011-10-14 - 17:14 by JonPetterOmtvedt

LayoutGuideLines

Guidelines for Control System GUI Layout Use of colors Color codes for the different part of the LabView GUI (as used by JPO): * Gray background "box": Hue=16...

r2 - 2011-10-14 - 22:14 by JonPetterOmtvedt

LogIntegralsToFile

How to log integrals and beam intensity to file continuously The Beam Control program will only write status data (integrals and beam intensities) to file if you ...

NEW - 2011-08-22 - 10:40 by JonPetterOmtvedt

LostMacroPulse

If the Macro Pulse have been lost... If the macro pulse signal is lost, e.g. if the control room decided to take it away, both the Beam Control and Beam Monitor p...

NEW - 2011-06-10 - 19:58 by JonPetterOmtvedt

MeetingDec142011

Kickoff Meeting for the new Unified TACSA Control System Date: Wednesday 14.December 2011 Attendees: Holger Brand, Sascha Yakuschev, Matthias Schädel, Egon Jäger ...

r2 - 2012-01-09 - 16:33 by HolgerBrand

MeetingSep042009

TASCA Target Wheel Control Kickoff Meeting Date September 4, 2009, 13:00h Room SIS Zimmer BR 2.141 Subject TargetWheelControl Agenda * Main....

r3 - 2009-09-09 - 10:28 by HolgerBrand

OperateTASCA

Guide for TASCA shift crews TASCA is operated using a number of computers running control system software (mostly LabVIEW) controlling different parts and aspects...

r6 - 2020-02-07 - 17:05 by HolgerBrand

RotatingMultiAnalyzer

Rotating Multi Analyzer This wiki web contains the project specific documentation for the Rotating Multi Analyzer. Kickoff / Project On August 26th, 2009 it was ...

NEW - 2009-09-09 - 10:37 by HolgerBrand

SlitControlImages

Slit Control Application This application is used to control slit, degrader and FPD positions. Constant motion parameters are defined in a configuration file. No ...

r2 - 2010-10-22 - 10:40 by EgonJaeger

TASCAGasControlOct2011

TASCA Gas Control Program (LabView) A new version of the the original program (written by Karsten Opel around 2007) was made by JPO in October 2011. The new versi...

r2 - 2011-10-14 - 23:24 by JonPetterOmtvedt

TASCAParameterList

TASCA Parameter List Main.JonPetterOmtvedt 21 Dec 2011 Parameter Description Unit Sampling Frequency Logging ...

NEW - 2011-12-21 - 09:44 by JonPetterOmtvedt

TCSControlStationInteraction

TASCA Control System How to Interact with and Control the System New section added by JPO on 20th June 2012. Return to Control System main document The front en...

NEW - 2012-06-20 - 10:05 by JonPetterOmtvedt

TCSDelimitationEmbeding

Delimitation, Embedding and Restrictions of the Program Back to main docuemt: Return * TCS does not include control loops. Control loops are part of connected ...

NEW - 2012-06-19 - 22:23 by JonPetterOmtvedt

TCSDetailedDescription

Detailed description of the required product features Return to Main Document: Return Top Scope of delivery The scope of delivery must contain a list of all deli...

NEW - 2012-06-19 - 22:44 by JonPetterOmtvedt

TCSExtInterfaces

External interfaces of the product Return to main document: Return Top 1 User interfaces This section must describe how the product communicates with the users...

NEW - 2012-06-19 - 23:01 by JonPetterOmtvedt

TCSHardwareSoftwareSpecs

Return to main document: Return Hardware and software specifications * Hardware * Windows XP SP3 PC with PXI Extension chassis with NI Multifuction I/O ...

NEW - 2012-06-19 - 22:30 by JonPetterOmtvedt

TCSHowToShowInfo

TASCA Control System How to Display and Provide Information New section added by JPO on 20th June 2012! Return to Control System main document. The front end of...

r5 - 2012-06-22 - 23:06 by JonPetterOmtvedt

TCSOtherFeatures

Other Required Control System Features Return to main document: Return Top 1 Performance 1 All signals concering the interlock system are connect to and ...

NEW - 2012-06-19 - 23:10 by JonPetterOmtvedt

TCSProjectManagement

TASCA Control System Specifications for project management Return to main document: Return Top Implementation requirements * Hardware * Development c...

NEW - 2012-06-19 - 23:18 by JonPetterOmtvedt

TCSRelatonshipOtherProjects

Return to main document: Return Relationship with existing projects There are two very important project related to TCS: * Target Wheel Slit Control * Da...

NEW - 2012-06-19 - 22:12 by JonPetterOmtvedt

TCSRequiredFunctions

Required Functions of the TASCA Control System Return to main document: Return Top 1 Interlock generation 1 The monitoring of interlock conditions will b...

NEW - 2012-06-19 - 23:02 by JonPetterOmtvedt

TCSTascaAi

TASCA Control System "Artificial Intelligence" New section added by JPO on 19th June 2012 Return to Control System main document: Required Functions Top Return ...

NEW - 2012-06-19 - 23:53 by JonPetterOmtvedt

TCSValidityOfDocument

Validity of Document and Definitions This section was moved out of the main document to improve readability and overview JPO Jun2012 Back to main docuemt: Ret...

NEW - 2012-06-19 - 21:52 by JonPetterOmtvedt

TCsComputerConfiguration

TASCA Controls Computer Configuration This page describes the hardware and software comfiguration of the TASCA Controls Computer. All Computers * Installed so...

r9 - 2012-01-24 - 11:50 by EgonJaeger

TCsMeetingMinutes

TASCA Controls Meeting Minutes MeetingRooms@GSI The following table contains the links to the meeting protocols MeetingSep042009 Kickoff meeting M...

r2 - 2012-01-09 - 14:51 by HolgerBrand

TWCsIntroduction

Target Wheel Introduction An aluminium wheel that carries thin targets is used in TASCA experiments to enhance the ion beam intensity by distributing the energy l...

NEW - 2009-10-05 - 10:19 by HolgerBrand

TWCsPrimaryRequirements

Target Wheel Primary Requirements An overview of this project and primary requirements are described in the attached TargetWheel.pdf file. Main.HolgerBrand 05...

r2 - 2009-11-05 - 15:05 by EgonJaeger

TargetWheelControl

Target Wheel Control This wiki web contains the project specific documentation for the Target Wheel Control. Kickoff / Project On September 4th, 2009 it was deci...

r2 - 2009-10-05 - 10:22 by HolgerBrand

TascaControls

TASCA Controls This part of Tasca WikiWeb will describe the applications to control and monitor the TASCA experiments. * TCsMeetingMinutes * TCsPhones * ...

r25 - 2012-01-09 - 16:50 by HolgerBrand

TascaDetetor

Description of TASCA Detectors Following some link to user pages: * MWPC Main.InnaPysmenetska 24 Aug 2010

NEW - 2010-08-24 - 15:18 by InnaPysmenetska

TascaUTCS

Unified TACSA Control System This is the documentation of the UTCS. It is based on LabVIEW, NI Actor Framework and CS . Computer Configurations Following PC wi...

r6 - 2017-10-11 - 08:03 by HolgerBrand

TcsSwReqSpec

TCS Software Requirements Specification NOTE: This (very long and complex) document were broken down into several documents to enhance readability (by JPO Jun2012...

r21 - 2012-06-20 - 09:48 by JonPetterOmtvedt

UTCSP

Preparation of the Unified TACSA Control System During MeetingDec142011 is was decides to go for a new Unified Control System for TASCA. Several LabVIEW programm ...

r2 - 2012-01-10 - 17:08 by HolgerBrand

UiO

University of Oslo Main.JonPetterOmtvedt 14 Oct 2011

NEW - 2011-10-14 - 22:15 by JonPetterOmtvedt

UnifiedBeamControlSuggestions

Proposal for a New Unified Beam Control Monitoring Program The current solution with two beam control/monitoring programs is not optimal and difficult for the u...

r2 - 2011-12-21 - 09:21 by JonPetterOmtvedt

UsingBeamControl

Instructions on how to use the Beam Control Program What do I do if ...: * I want to start up the program BCStartUp * I want to control the chopper BCContro...

r4 - 2011-08-22 - 10:35 by JonPetterOmtvedt

UsingTASCAGasControl

Using the TASCA Gas Control LabView Program Main.JonPetterOmtvedt 14 Oct 2011

NEW - 2011-10-14 - 08:51 by JonPetterOmtvedt

VacuumControl

Vacuum Control The vacuum control application consists of to parts: * The server part becomes implemented using LabVIEW 8.5.0 Realtime on Compact Fieldpoint cF...

r4 - 2011-09-28 - 10:22 by HolgerBrand

ViewingUTCSFrontpanels

TASCA UTCS CSPP_FrontPanels are published. * ObjectManager * AlarmManager * Interlock * Beam Control * Beam Trend * Pyrometer * Gas Con...

r2 - 2020-02-07 - 17:00 by HolgerBrand

WebChanges

NEW - 2001-08-16 - 21:58 by PeterThoeny

WebHome

This is a web based collaboration area for the TASCA Collaboration: Instructions to experimenters: * OperateTASCA Operationg the TASCA Control System (in the ...

r13 - 2017-06-30 - 12:07 by HolgerBrand

WebIndex