__ Introduction * One Wire ADC is an application implemented inside the FPGA of the HadCon2 board. It can provide 6 channel, max. 12bit ADC to be accessed by ...
__ Introduction This topic shows how to change the uboot environment settings of a dreamplug to be enabled to boot from several bootable device in addition t...
__ Introduction Using the Installation scripts and schemata at EpicsInstallationsAtGsi, Epics base, and the following list of extensions and modules are installe...
Device Driver/device support modules and Interfaces #EpicsDimInterface EPICS DIM interface ... see EPICS DIM interface for further information. Status: ...
HadCon Multipurpose Controls Device Classes Device Classes supported by the API CAN bus * Acting as a CAN bus master, using connector JCAN1 * up to ...
Temperature measurement HADControl Introduction The HADControl general purpose board provides access to many external interfaces and devices. The task is ...
HADES Slow Control: Hadcon1 based systems Introduction Description of the systems controlled via EPICS IOCs running on HadCon1 (a.k.a. HadShoPoMo) systems at H...
HADES Magnet: Hall Sensor Readout Introduction Using the port folio of HadCon based applications the objective of this project is to realize a reading of seve...
Hardware Experience Collection Introduction The idea is to collect recommended hardware tools in use and experiences serial ComPorts/ComServer LAN hArr; R...
epics Invocation Scheme The setup script epics relies on other scripts in the EPICS versions home directories. Here you can see how those files are invoked: * ...
Collection of connections and evaluation on connecting to other control systems There have been and for sure will be some requests on the question How...
(my personal) Documentation and Overview of HADES slow control system Coordination * Burkhard Kolb, GSI Links * HADES * Slow Control System of HADES ...
Beckhoff Device Access via EPICS CBM RICH test mirror positioning system Summer Student Project 2011 Introduction As part of the summer student program ...
HADES I/O Box Note: this is just an internal, clipped copy of HADES I/O Box at the HADES wiki, used for documentation Introduction Based upon the HadCon2 ...
Connecting MonALISA and EPICS Introduction MonALISA MonALISA stands for Monitoring Agents using a Large Integrated Services Architecture, is based on Dynamic...
Architecture: ETRAX's CRIS by AXIS Abstract The ETRAX 100LX MCM from AXIS (Wikipedia: en/de) is the core of several boards (e.g. HADControl (HadCon), TRB) dev...
JavaScript Toggle Image size By including this topic JavaScriptToggleImages via %INCLUDE{...}% this JavaScript function (by Simon Lang) enables you to swi...
Temporary Place for download of CSS 2.5 due to SNS failures * epics_css_2.5.0 linux.gtk.x86_64.zip: 64 bit * sns_css_2.5.0 linux.gtk.x86.zip: 32bit * sns...
CAN bus implementation on HADControl Introduction The objective of this project is the implementation of a software on the HADCon(trol) board's AVR micro control...
HADES MDC Gas Monitor Introduction The large scale HADES Experiment at GSI uses drift chambers for particle tracking purposes. In order to monitor the gas press...
Integrating DIM into the Control System Studio on the Data Access Layer This page documents the progress of the project. The project is not finished yet. First, I...
Collection of Talks and Presentations ... an incomplete set of talks and presentations ... Talks EPICS Meetings EPICS Collaboration Meeting, 03 2008, Shangha...
HOWTO: setup HADES IOC to start at reboot Objective When switching on or in case of a hardware reset of the system the IOC is running on, the IOC should be (...
template script: (re)start soft IOC lxg0434 at reboot ... just the settings to change %begin bash% #specific predefines userDefines() { userProcServTelnetP...
template script: (re)start soft IOC at Reboot Code %begin bash% #!/bin/bash # ioc .sh # starts EPICS IOC in background using procServ tool # by defini...