Device Driver/device support modules and Interfaces

EPICS DIM interface

The basic idea of this device support module for EPICS is to provide an interface to the DIM protocol in order to read/write EPICS data seen from the DIM world and to act from EPICS as client/server for services and commands in the DIM regime.

... see EPICS DIM interface for further information.
Status: running system, documentation: 50%
-- PeterZumbruch - 2017-05-29

DABC extension to the EPICS DIM interface

Based upon the existing EPICS DIM interface several data structures provided by DABC (Data Acquisition Backbone Core) transporting values together with additional attributes, similar to EPICS records, via the transport mechanisms of DIM should be able to be accessed from EPICS via an extension to the above mentioned original interface.

... see DABC extension to the EPICS DIM interface for further information.
Status: project init phase, documentation: 5%
-- PeterZumbruch - 2018-01-08

HADCon(trol) / TRB based controls

The HADCon(trol) general purpose board provides access to many external interfaces and devices. This section is about interconnecting those with the EPICS technology.

Temperature measurement HADCon(trol)

The HADControl general purpose board provides access to many external interfaces and devices.
The task is to replace the already running ansatz of the HADES MDC Gas Monitor temperature measurement by a pure EPICS based design.

... more see Project Page
Status: implemented:100%; documentation: <10%
-- PeterZumbruch - 2013-03-21

---

CANbus implementation on HADCon(trol) and control via access

The objective of this project is the implementation of a software on the HADCon(trol) board's AVR micro controller. This software enables the control of AVR micro controller's CANbus Interface using an (ASCII based) Application Programming Interface (API). Integrated via streamDevice driver into EPICS the control of CANbus devices will be possible within EPICS.

... more see Project Page
Status: implemented 90%; documentation:50% :
-- PeterZumbruch - 2011-02-28

---

Multi-purpose control implementation on HADCon(trol) for HADES

edit
HadCon is a general purpose IO module for detector and experiment control as well as for small data acquisition systems.



(HADControl general purpose board) Since its first application has been a power monitor for the Hades Shower Detector it has been formerly introduced and well known as HadShoPoMo (Hades Shower Power Monitor (HADControl/HadShoPoMo general purpose board).

HadCon has an SoC on-board, ETRAX 100LX MCM 4+16 from AXIS (Wikipedia: en/de) - which will be discontinued, see the new HadCon2.
Running a standard Linux the Etrax provides "Connectivity to the world" via TCP/IP.
On the other side it connects via its internal serial interface to an ATMEL AT90CAN128 microcontroller and optionally to an Xilinx CPLD.
Via this junction the ATMEL provides a multitude of possible connections to field buses and general I/O ports.
EPICS base and its applications, modules, and extensions can be cross-compiled to run on Etrax Axis' CRIS architecture (see section Architecture: ETRAX's CRIS by AXIS
• Summarizing:
  • CPU: AXIS ETRAX 100LX MCM 4+16
  • Microcontroller: ATMEL AT90CAN128
    • I²C (internal)
      • 2 × 4-channel 8-Bit DAC - Digital-to-Analog Converter
    • CANbus
      • galvanically isolated CAN - High-speed CAN Transceiver
        • optional external power supply
    • SPI
    • ADCs
    • RS232
    • 32 digital I/Os
  • CPLD: Xilinx XCR3064XL-6CS48C
  • 2 × Rotary Code Switches, hexadecimal coding
  • Ericsson PME 5218TS switching regulator for up to 6A 3.3V power usable for other boards
  • full EPICS support
This projects' objective is to combine all existing HadCon (HADControl general purpose board) implementations into one μController code for its ATMEL AT90CAN128:
• CANbus (based on the thesis and work of L.Fouedjou, see Project Page)
• One-Wire bus implementation
  • ADC
  • DAC
  • Temperature
  • Switches
• HadCon's internals
  • DACs
  • ADCs
• ...


... more see Project Page
Status: implemented 50%; documentation:10% :
-- PeterZumbruch - 2020-12-11

---

Multi-purpose control implementation on HADCon(trol) 2 for HADES

No permission to view HadCon2MultipurposeControlsApi

... more see Project Page
Status: implemented 10%; documentation:30% :
No permission to view Epics

PLC Industrial Control devices

In this section several industrial control devices running PLC or SPS programs are addressed

SattCon 200, ABB, HADES cryo control

There is a request of HADES to be able to integrate readings from the control system of their cryo system control into the EPICS control system of HADES Maybe, in a second step, also changing of values is of interest.
Right now the system runs a PLC on an ABB SattCon 200 system, which can be accessed by a Windows based control PC, via the ABB Automation PC-based programming tool DOX 10.

... more see Project Page
Status: evaluation whether it becomes a project - turned out to be not feasible; documentation:10% :
-- PeterZumbruch - 2021-06-23

---

Beckhoff Device Access via EPICS ModBus
- CBM RICH test mirror positioning system
- Summer Student Project 2011

As part of the summer student program 2011 at GSI this projects objective is to develop, evaluate an exemplary motor control, on basis of basic existing components which will
• use Beckhoff devices
• be accessed via modBus
• be controlled via EPICS
• be displayed, e.g. with CSS
• (offered to be) used for TASCA, CBM, HADES

UPDATE

Meanwhile the project became more detailed, since CBM showed interest to have a RICH mirror setup motor controlled. This setup requires to have 2 servo motors with a gear reduction to tilt a gimbal mounted planar mirror element (400 mm × 400 mm) in 2 directions. It is foreseen to use this setup during CBM's next test beam time.

TASCA

Until the ordered parts have arrived, we could use spare equipment of TASCA to develop and test. Thank you.



... more see Project Page
Status: project finished; documentation:75%
-- PeterZumbruch - 2011-10-05

---

---

---