S2 — Target Ladders - (GTS3ET7RS, GTS3ET7LS, GTS3ET7US)

FRS Home Page - – S2 – Pictures – Drawings – Cable Connections

---

Updated February 11, 2021.

Settings

Atomic Collision Targets

Targets mounted: 19.03.2019, serial numbers 200 - 252 in order as displayed below.
Few target positions remeasured 13.11.2019 -> positions in table shifted.
All targets are mounted with an aperture plate diameter = 5mm
PP = polypropylene (targets are stacked)

 

GTS3ET7US
Ladder position	Target - ID	Material	mg/cm2 *	+/- mg/cm2 **	position mm
1	C-3	carbon	19.96	0.44	-696.2
2	C-6	carbon	177.78	0.80	-670.7
3	C-0_18mm-2	carbon, sigradur	29.08	0.05	-645.2
4	C-1mm-1	carbon, sigradur	135.37	0.19	-619.7
5	Al-6	Al	49.03	1.90	-594.2
6	Al-4	Al	17.68	0.84	-568.7
7	Ti-1	Ti	239.51	5.76	-543.2
8	Ti-2	Ti	8.37	0.44	-517.7
9	Ti-4	Ti	18.62	0.38	-492.1
10	aperture only	empty			-466.6
11	Zr-3	Zr	22.80	0.76	-441.1
12	Zr-6	Zr	258.14	5.34	-415.6
13	Sn-4	Sn	11.96	1.67	-390.1
14	Sn-7	Sn	72.07	3.50	-364.6
15	PP-2	PP	9.68	0.08	-339.1
16	PP-4	PP	25.99	0.11	-313.6
17	Sn-2	Sn	2.20	1.08	-288.1
18	Sn-10	Sn	183.65	1.09	-262.6
19	PP-9	PP	2.62	0.03	-237.0
20	empty	empty
Endposition [OUT]					-767.6
Endposition [IN]					-215.4

* measured weight / measured area
** deviation from measured thickness variation

---

 

GTS3ET7RS
Ladder position	Target - ID	Material	mg/cm2 *	+/- mg/cm2 **	position mm
1	C-2	carbon	8.77	0.38	662.7
2	C-4	carbon	58.92	1.09	637.2
3	C-0_3mm-2	carbon, sigradur	42.53	0.11	611.7
4	C-0_10mm-3	carbon, sigradur	13.47	0.08	586.1
5	Al-2	Al	8.11	0.54	560.6
6	Al-5	Al	33.09	1.18	535.1
7	Zr-7	Zr	263.15	3.03	509.6
8	Ti-5	Ti	38.45	0.49	484.1
9	Ti-6	Ti	103.46	0.34	458.5
10	aperture only	empty			433.0
11	Zr-1	Zr	10.03	0.89	407.5
12	Zr-4	Zr	45.34	0.64	382.0
13	Sn-5	Sn	19.25	2.42	356.5
14	Sn-8	Sn	48.18	7.00	330.9
15	PP-3	PP	13.36	0.10	305.4
16	PP-5	PP	64.06	0.19	279.9
17	PP-7	PP	16.73	0.11	254.4
18	C-0_14mm-2	carbon, sigradur	22.84	0.07	228.9
19	empty	empty			203.3
20	empty	empty			177.8
Endposition [OUT]					732.0
Endposition [IN]					177.0

* measured weight / measured area
** deviation from measured thickness variation

---

 

GTS3ET7LS
Ladder position	Target - ID	Material	mg/cm2 *	+/- mg/cm2 **	Position mm
1	C-1	carbon	7.53	0.46	657.5
2	C-5	carbon	81.85	0.42	631.9
3	C-0_5mm-2	carbon, sigradur	73.53	0.15	606.3
4	C-0_06mm-2	carbon, sigradur	8.14	0.10	580.7
5	Al-1	Al	196.31	1.43	555.1
6	Al-3	Al	12.90	0.47	529.5
7	Al-7	Al	126.67	0.26	503.9
8	Ti-3	Ti	13.60	0.38	478.3
9	Ti-7	Ti	102.91	0.33	452.7
10	aperture only	empty			427.1
11	Zr-2	Zr	16.90	0.72	401.5
12	Zr-5	Zr	60.04	1.05	375.9
13	Sn-1	Sn	264.14	2.50	350.3
14	Sn-6	Sn	22.98	2.08	324.7
15	PP-1	PP	6.18	0.06	299.1
16	PP-6	PP	119.58	0.43	273.5
17	Sn-3	Sn	3.46	1.54	247.9
18	Sn-9	Sn	~184?		222.3
19	PP-8	PP	45.92	0.41	196.7
20	empty	empty			171.1
Endposition [OUT]					730.0
Endposition [IN]					169.0

* measured weight / measured area
** deviation from measured thickness variation

---

 

Messagelog

 

-- SagarRoy - 2021-06-26