S2 — Degrader Tables

FRS Home Page — — S2 — Degrader Calculator — Pictures — Drawings — Cable Connections

---

Degrader Calculator

• S2 Calculation

• S2 Calculation Back

 

Degrader Tables

• Ladder at S2

• Disk at S2

• Double Wedge at S2

 

Ladder at S2 (TS3ED7LS) Date: Sep-11-2009

Name	OUT	Plate 1	Plate 2	Plate 3	Plate 4	Plate 5	Dimension
Position	-107.70	50.00	150.00	250.00	350.00	450.00	mm
Maximum Thickness	—	16.00	32.00	48.00	64.00	80.00	mm
Minimum Thickness	—	16.00	32.00	48.00	64.00	80.00	mm
Maximum Thickness	—	4,293.60	8,587.20	12,880.80	17,174.40	21,468.00	mg / cm2
Minimum Thickness	—	4,293.60	8,587.20	12,880.80	17,174.40	21,468.00	mg / cm2
Length	—	200.00	200.00	200.00	200.00	200.00	mm
Height	—	100.00	100.00	100.00	100.00	100.00	mm
Material	—	AlMg3	AlMg3	AlMg3	AlMg3	AlMg3	—
Density	—	2,683.50	2,683.50	2,683.50	2,683.50	2,683.50	mg / cm3

End of 2019 two plates were exchanged by wedge shaped plates of x * y = 195.7mm * 100mm
material: AlMg3 with density 2.66 g/cm³
plate P-000, x-slope=0.01700, mean_z=3.659mm ( 974 mg/cm^2), std. deviation from plane sigma_z=5.3um.
plate P-V01, x-slope=0.03402, mean_z=5.311mm (1413 mg/cm^2), std. deviation from plane sigma_z=2.1um.

 

Disk at S2 (TS3ED7DS/TS3ED7DP) Date: Sep-11-2009

Name	Disk 1[D-S2-1/1] [red]	Disk 2 [D-S2-1/2] [blue]	Dimension
Maximum Thickness	2.27	2.49	mm
Minimum Thickness	0.24	0.46	mm
Maximum Thickness	611.15	670.38	mg / cm2
Minimum Thickness	64.62	123.85	mg / cm2
Radius	114.00	114.00	mm
Material	AlMg3	AlMg3	—
Density	2,692.31	2,692.31	mg / cm3

(*) The density was adjusted to the areal weight measured with beam and ATIMA (735 mg/cm² for both).

 

Double Wedge at S2 (TS3ED7VO/TS3ED7VU) Date: Sep-11-2009

Name	Upper	Lower	Dimension
Out Position	106.60	-615.80	mm
Maximum Thickness	12.50	12.50	mm
Minimum Thickness	0.50	0.50	mm
Maximum Thickness	3,354.38	3,354.38	mg / cm2
Minimum Thickness	134.18	134.18	mg / cm2
Length	200.00	200.00	mm
Height	500.00	500.00	mm
Material	AlMg3	AlMg3	—
Density	2,683.50	2,683.50	mg / cm3

 

-- SagarRoy - 2021-07-20