-- PiotrSzwangruber - 27 Nov 2015

Magnet current data acquisition using DCCTs and DVMs

Equipment for magnet current measurements at the dipole series test facility is located in room SH5/2.001 (magnet power supply room). Two magnet power suppplies and accordingly two magnet current measurement devices (DCCTs) are available, providing a voltage of +10Vdc @ 20kA each to the input of a digital voltmeter (DVM).
  1. LAN-Switch at network socket SH1A01 (supported by R. Vincelli, CSCO 2345)
    • Dedicated connector: 01X05 (marked with blue dot)
    • IP-Name: NWE41Em
  2. GPIB to LAN-Converter/Controller type NI-GPIB-ENET/1000; registered at ACC and GSI network
    • MAC: 00-80-2F-21-A8-A7
    • IP: 140.181.74.50
    • IP-Name: MTDEV008
    • Default Hostname: NIENET1A98F55
  3. Two DVMs type Keysight 3458A; 8.5digit; accessible via GPIB
    1. QuD1 +3, Serial No. MY45052070; GPIB-Addr.: 13, dedicated to DCCT1 (Feedbox 1 and 3)
    2. QuD2 +4, Serial No. MY45051842; GPIB-Addr.: 24, dedicated to DCCT2 (Feedbox 2 and 4)
  4. Two DVMs type Keysight 34470A; 7.5digit; accessible via LXI-Interface at LAN-Switch; registered at ACC and GSI Network
    1. QuD1 +3, Serial No. MY54701233; GSI-ID: 08492, MAC: 80-09-02-02-9D-C8, IP-Addr.: 140.181.68.136, IP-Name: MTDEV012, dedicated to DCCT1 (Feedbox 1 and 3)
    2. QuD2 +4, Serial No. MY54701382, GSI-ID: 08493, MAC: 80-09-02-03-28-54; IP-Addr.: 140.181.68.202, IP-Name: MTDEV013, dedicated to DCCT2 (Feedbox 2 and 4)
Each DVM in SH5 is connected to a trigger line (SYNC, Coax RG58, currently available at the QuD -cabinets) for synchronization of measurements with another DVM at the testbenches in SH2. The former Y-configuration of SYNC cables was removed.

Convention: DCCT-DVM is trigger slave (Input - EXT. TRIG), testbench-DVM is trigger master (Output - EXT. OUT).
Topic attachments
I Attachment ActionSorted ascending Size Date Who Comment
DCCT-DVM_Config_STF_2016-Oct-18.pdfpdf DCCT-DVM_Config_STF_2016-Oct-18.pdf manage 1391.6 K 2016-10-19 - 10:05 WalterFreisleben DCCT and DVM configuration for dipole series testing in STF
Edit | Attach | Print version |  PDF | History: r8 | r6 < r5 < r4 < r3 | Backlinks | View wiki text | Edit WikiText | More topic actions...
Topic revision: r5 - 2016-12-21, WalterFreisleben
 
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding GSI Wiki? Send feedback
Imprint (in German)
Privacy Policy (in German)