__ Introduction Idea of C.Wendisch / HADES: Objektive: Readout 4 20mA current loop with a mini computer (e.g. RasperryPi, Odroid, ...) with an included docker ...
__ Introduction Issue of this project is to get a docker based EPICS system with: * EPICS IOC connecting to an DT1470ET device * CAENs DT/N147x family ...
Projects Activities EPICS installations Installations of EPICS at GSI step by step This section 'EPICS Installation at GSI' explains step by step with co...
__ Introduction This projects objective is the control of the slow control parameters of an APFEL ASIC with the HadCon2 controller board, which itself could b...
__ Introduction EPICS IOC based on StreamDevice to access HadCon2's Registers via the commands RGRE and RGWR for read and write. * The objective is to modi...
HADES DAQ Monitor Introduction The HADES data acquisition system is based on the trbnet architecture. Its status and controls are accessed via the command (shell...
HADES Magnet: Hall Sensor Readout Introduction Using the port folio of HadCon based applications the objective of this project is to realize a reading of seve...
__ Introduction The large scale HADES Experiment at GSI uses a RICH (ring imaging cherenkov detector) for particle discrimination and (basic) tracking purposes. ...
__ Introduction The large scale HADES Experiment at GSI uses a RICH (ring imaging cherenkov detector) for particle discrimination and (basic) tracking purposes. ...
HADES RPC Gas System Monitor Introduction Besides the Threshold setting and Temperature/Voltage/Current Monitoring the RPC (resistive plate chamber) detector ...
__ Introduction Different Solutions for accessing TRBNet information by EPICS have been developped ... an incomplete list. EPICS trbnet Applicatons trbnet to ...