The STF web of GSI Wiki. Documentation for the Serial Test Facility for the superconducting SIS-100 dipole magnets. https://wiki.gsi.de/STF Copyright 2026 by contributing authors <updated>2021-03-22T10:06:39+01:00</updated> https://wiki.gsi.de/STF/WebHome 2021-03-22T10:06:39+01:00

Serial Test Facility This wiki contains the documentation for the Serial Test Facility for the superconducting SIS 100 dipole magnets. Important Links * Netwo... (last changed by FlorianKaether)

FlorianKaether https://wiki.gsi.de/STF/SCUForPowerConverters 2018-03-08T14:06:12+01:00

SCU's for the power converters used at the magnet test stations The SCU's at the test station are SCU's as they will be used in the FAIR machine. These boot from ... (last changed by FlorianKaether)

FlorianKaether https://wiki.gsi.de/STF/PowerConverterControlScripts 2017-11-02T16:03:23+01:00

Overview: All the following scripts are located in /usr/local/bin/ and can be run just as command mole@scuxl0xyz $ script.sh Scripts with Load parameters * P... (last changed by FlorianKaether)

FlorianKaether https://wiki.gsi.de/STF/PowerConverterDocumentation 2017-11-02T15:42:30+01:00

Power converter control program documentation The power converter is documented in different files. * Description of the command line and server interface to... (last changed by FlorianKaether)

FlorianKaether https://wiki.gsi.de/STF/InstallSTFTeststandSoftware 2017-06-23T16:25:24+02:00

How to install the STF Teststand Software You need local admin permission to install software on GSI Windows PC's. 1 Mount network disk: \\winfilesvh.gsi.de\M... (last changed by RobertJaeger)

RobertJaeger https://wiki.gsi.de/STF/CurrentMeasurementEquipment 2017-06-09T14:01:50+02:00

Main.PiotrSzwangruber 27 Nov 2015 Magnet current data acquisition using DCCTs and DVMs Equipment for magnet current measurements at the dipole series test facili... (last changed by WalterFreisleben)

WalterFreisleben https://wiki.gsi.de/STF/PowerConverterLoadParameters 2017-05-17T18:58:17+02:00

Load parameters used for the power converter SIS100 dipole Main parameters The load maximum current was currently set to FMT_LOAD_MAXIMUM_CURRENT='17e3' The po... (last changed by AlexanderWarth)

AlexanderWarth https://wiki.gsi.de/STF/ModifyConfigurationSTFTeststandSoftware 2017-05-17T18:53:05+02:00

Main.RobertJaeger 21 Jul 2016 This section describes how to modify and adjust a STF.ini file for specific purposes. 1 There are three versions of the STF.ini fi... (last changed by AlexanderWarth)

AlexanderWarth https://wiki.gsi.de/STF/InstallSTFSoftwareOnLinux 2017-05-17T18:48:51+02:00

Installing STF Software on Linux The STF software was tested with LV2015 on Linux. The used box was a virtual machine running Labview 2015 with patch3. Unfortunat... (last changed by AlexanderWarth)

AlexanderWarth https://wiki.gsi.de/STF/PowerConverterControlSoftware 2017-05-17T18:42:07+02:00

Power converter control software The magnet power converters at the test station are controlled by a software package, which enables the user to steer it by: *... (last changed by AlexanderWarth)

AlexanderWarth https://wiki.gsi.de/STF/PowerConverterControlProgramTesting 2017-05-17T18:27:40+02:00

Testing Environment for the power converter control program Using the test rack Testing the program with a real power converter could be a bit troublesome. There... (last changed by AlexanderWarth)

AlexanderWarth https://wiki.gsi.de/STF/PowerConverterTriggerLines 2017-05-17T18:21:35+02:00

Using the general input output of the SCU for TTL triggers Introduction The SCU provides 2 groups of lemo inputs. At the stage of this writing only two of them a... (last changed by AlexanderWarth)

AlexanderWarth https://wiki.gsi.de/STF/20kAPowerSupplyEnglish 2017-05-17T18:16:30+02:00

Highcurrent PowerConverter Networkinterface The power converters are driven by a C program. This used libfesl to address register in the Accu thereby drive the d... (last changed by AlexanderWarth)

AlexanderWarth https://wiki.gsi.de/STF/LynxOSSystemStartUp 2016-11-30T09:29:23+01:00

Starting power converter software on LynxOS sytem The power converter control program was originally operated on a LynxOS system using a pci card that would send ... (last changed by PierreSchnizer)

PierreSchnizer https://wiki.gsi.de/STF/20kAPowerSupply 2016-11-24T11:08:03+01:00

Hochstrom Netzgerät Networkinterface Die Netzzgeräte werden von eim C Programm angesteuert. Dieses verwendet libfesl um die Register im Accu anzusprechen und dad... (last changed by PierreSchnizer)

PierreSchnizer https://wiki.gsi.de/STF/GeraeteDokummentation 2016-11-08T11:33:06+01:00

Documentation of Device used at STF * Table of device used at STF * Documentation of the (main) power converters * DCCTs DVMs (last changed by PierreSchnizer)

PierreSchnizer