Machine Signals
The following shall give an overview of the electronic interfaces at the machine to specific signals, e.g. for
data acquisition.
Timing system
scuxl0319
The timing receiver
scuxl0319
is located in electronics hutch (TH2.033), at the top of rack EX3. Besides the two B1/B2 channels on the SCU card, it contains two function generator cards type FG 900.740 with 8 digital outputs. The B1/B2 channels can be freely reprogrammed to any White Rabbit event, while the function generator cards contain a pre-defined assignment to specific events.
Channel |
type |
Function |
B2 |
TTL |
Genesys: TBA |
B1 |
TTL |
Genesys: Hi-Level from CMD_EXP_DAQ_START CMD_EXP_DAQ_STOP |
FG1-1 |
|
in preparation |
FG1-2 |
|
in preparation |
FG1-3 |
|
in preparation |
FG1-4 |
|
in preparation |
FG1-5 |
|
in preparation |
FG1-6 |
|
in preparation |
FG1-7 |
|
in preparation |
FG1-8 |
|
in preparation |
FG2-1 |
|
in preparation |
FG2-2 |
|
in preparation |
FG2-3 |
|
in preparation |
FG2-4 |
|
in preparation |
FG2-5 |
|
in preparation |
FG2-6 |
|
in preparation |
FG2-7 |
|
in preparation |
FG2-8 |
|
in preparation |
scuxl0006
A second timing receiver is
scuxl0006
and is located in cooler HV platform, running genesys class. There are only two channels, the B1/B2 channels on the SCU card.
Channel |
Level |
Function |
B1 |
TTL |
Genesys: Hi-Level from CMD_EXP_DAQ_START CMD_EXP_DAQ_STOP |
B2 |
TTL |
Genesys: TBA |
Beam diagnostics

A patch panel at the top of rack EX3 in the electronics hutch (TH2.033) is interfacing with signals from the
BeamDiagnostics electronics room (connectors: BNC-50Ω) The assignment of the channels is semi-permanent and as follows:
--
MichaelLestinsky - 2022-03-26